G E T T I N G S T A R T E D [ 2 4 ]
w w w . u n i d e n . c o m
If the selected speed dial number is already assigned, the Edit
screen appears. You can select
'FKV
to edit this entry, select
&GNGVG
to erase this entry, or select
)Q$CEM
to choose another
speed dial number.
4) Enter a name according to the instructions below, then press the
select
key. If no name is
required, go to "Entering phone numbers" on page 25.
• The name can be up to 13 characters.
• Use the
#/
o
and
*
/tone/
m
keys to move the cursor to the desired location.
• Use the
delete/channel
key to delete characters as needed.
• Press and hold the
delete/channel
key to delete all the characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order:
Upper case letters first, lower case letters next and finally the number corresponding to
the key.
If you make a mistake while entering a name
Use the
*
/tone/
m
or
#/
o
key to move the cursor to the incorrect character.
Press the
delete/channel
key to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold the
delete/channel
key.
If the next character
uses the same number
key, you must press the
#/
o
key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
note
GETTI
NG ST
AR
TED
UP033BH_EXI7246C.book Page 24 Wednesday, June 2, 2004 1:30 PM
