manualshive.com logo in svg

Uniden DXAI5688 Series, Руководство пользователя

Поделиться
Скачать
Uniden DXAI5688 Series Скачать руководство пользователя страница 54

53

Symptom

Suggestion

The Caller ID does not 

display.

• The call was answered before the second ring.

• The call was placed through a switchboard.

• Charge the handset.

• Your Caller ID service may not be active; contact your local telephone service 

provider.

A handset is not working.

• Make sure the battery pack is connected to the handset and fully charged. 

• Re-register the non-functional handset.

Unavailable message is 

displayed on the LCD screen 

of the handset.

• Make sure the other handset is not already in use. Two or more handsets cannot 

be in talk at the same time. 

• Place the handset in the base for at least five seconds to re-register to the base. 

• Make sure the handset is not too far from the base when trying to use.

The handset doesn’t 

communicate with the base or 

the other handset.

• Re-register all handsets (see page 3).

No three- way conversation.

• Only one handset at a time can talk with an outside caller. To allow the other 

handset to talk to the caller, transfer the call.

The answering machine does 

not work.

• Make sure the AC adapter is plugged into wall outlet.

• Make sure the answering machine is turned on.

The answering machine does 

not record any messages.

• Set the record time to either the one minute or four minute option.

• The memory may be full. Delete some or all of the saved messages.

Содержание DXAI5688 Series





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды