Uniden DXAI5688 Series Скачать руководство пользователя страница 12

Страница: 12 / 68

Mounting.the.Base.Unit.on.a.Wall

Standard.wall.plate.mounting

This phone can be mounted on any standard wall plate.

) Plug the AC adapter to the

DC.IN.9V

jack.

2) Route the AC adapter cord through the molded wiring channel as shown.

3) Plug the AC adapter into a standard 20V AC wall outlet.

4) Plug the telephone line cord into the

TEL.LINE

jack.

5) Route the telephone line cord through the molded wiring channel as shown.

6) Plug the telephone line cord into the telephone outlet.

7) Align the mounting slots on the base with the mounting posts on the wall.

Then push in and down until the phone is firmly seated.

Direct.wall.mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the

following:

• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when

inserting screws into the wall.

• Try to mount your phone within five feet of a working phone jack to avoid excessive cord lengths.

Содержание DXAI5688 Series





































































Результаты поиска

Содержание DXAI5688 Series

Отзывы:

Бренды по названию

Популярные бренды

Uniden DXAI5688 Series, Руководство пользователя

Результаты поиска

Содержание DXAI5688 Series

Отзывы:

Бренды по названию

Популярные бренды