3-Way Conferencing
This feature lets you add a third party to your conversation. You can use the
keys on either the Handset or the Base Unit.
❉
The
DX8200
must first be connected with two separate telephone lines.
For example, to add a party to the current call on line 1:
1.
Press
hold
to place the call on hold.
2.
Press
line 2
.
3.
Dial the number of the person you want to add to the conversation.
When that person answers, you can speak privately before bringing the
original call back on the line.
❉
If the third person’s number is busy or doesn’t answer, return to the
original call by pressing
line 1
.
4.
Press the
conf
button to bring the original call back on line.
5.
To remove either call from your conversation, press the line number (
line 1
or
line 2
) of the call that you want to remain connected to.
The other call is disconnected.
6.
When you hang up the
DX8200
, all calls are disconnected.
Using your
DX8200
Intercom
The Base Unit
ring vol
switch must be set to either “
lo
” or “
hi
. ”
( Note: When a call is on hold at the Handset and the Base Unit is paged, the
Base Unit will ring even when the
ring vol
switch is set to “
off
. ” )
Paging from the Base Unit to the Handset
1.
Press
int’com
. (If no answer, press
int’com
again to disconnect.)
2.
Press
talk
or
int’com
on the Handset to answer the page. Speak into the
mouthpiece.
3.
To turn off the Intercom, press
speaker
on the Base Unit.
— OR —
Press
talk
on the Handset.
Paging from the Handset to the Base Unit
1.
Press
int’com
on the Handset. (If no answer, press
int’com
to disconnect.)
2.
At the Base Unit, press
speaker
or
int’com
to answer the page. Speak into
the microphone.
3.
To turn off the Intercom, press
speaker
at the Base Unit.
32
