background image

Sheet 

Symptom

Suggestion

A handset is not 

working.

Make sure the battery pack is connected to the 

handset and fully charged.

Re-register the non-functional handset.

Unavailable 

message is 

displayed on the 

LCD screen of the 

handset.

Make sure another handset is not already in use. Both 

handsets cannot be in talk at the same time.

Place the handset in the base for at least five seconds 

to re-register to the base.

Make sure the handset is not too far from the base 

when trying to use.

The handsets can't 

communicate with 

each other.

Re-register both handsets.

No three-way 

conversation.

Only one handset at a time can talk with an outside 

caller. To allow the other handset to talk to the caller, 

transfer the call.

Voice Message 

Indication does not 

work.

Contact your local telephone company to make sure 

that your telephone receives FSK message signaling.

Reset the indicator by pressing and holding 

[find]

 for 

five seconds.

Liquid Damage

Moisture and liquid can damage your cordless phone.

If the handset or base is exposed to moisture or liquid, but only the exterior 

plastic housing is affected, wipe off the liquid, and use as normal.

If moisture or liquid has entered the plastic housing (i.e. liquid can be 

heard in the phone or liquid has entered the handset battery compartment 

or vent openings on the base), follow the steps below:

Handset

Base

Remove the battery cover and leave it off for 

ventilation.

Disconnect the battery pack. Leave the battery 

cover off and the battery pack disconnected 

for at least three days.

Once the handset is completely dry, reconnect 

the battery pack and the battery cover.

Recharge the handset's battery pack for  to 

20 hours before using.

)

2)

3)

4)

Disconnect the AC 

adapter from the 

base, cutting off 

electrical power.

Disconnect the 

telephone cord from 

the base.

Let dry for at least 

three days.

)

2)

3)

IMPORTANT:

You must unplug the telephone line while recharging the battery pack to 

avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will 

cause permanent damage to the handset, base and the microwave oven. After 

following these steps, if your cordless telephone does not work, please call 

our Customer Service Hotline. See back cover page for contact information.

11) Precautions!

Before you read anything else, please note the following:

Warning!

Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of 

fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.

Rechargeable Nickel-Cadmium Battery Warning

•  This equipment contains a rechargeable nickel-cadmium battery.

•  Cadmium is a chemical known to the State of California to cause cancer.

•  The rechargeable nickel-cadmium battery contained in this equipment may explode if disposed of 

in a fire.

•  Do not short-circuit the battery.

•  Do not charge the rechargeable nickel-cadmium battery used in this equipment in any charger 

other than the one designed to charge this battery as specified in the owner's manual. Using 

another charger may damage the battery or cause the battery to explode.

Rechargeable Nickel-Cadmium Batteries Must Be Recycled or 

Disposed of Properly

As part of our commitment to protecting our environment and conserving natural 

resources, Uniden voluntarily participates in an RBRC

®

 industry program to 

collect and recycle used Ni-Cd batteries within the United States. Please call 

-00--BATTERY for information on Ni-Cd battery recycling in your area. (RBRC

®

 

is a registered trademark of the Rechargeable Battery Recycling Corporation.)

Warning!

The cords on this product and/or accessories contain lead, a chemical known to the State of 

California to cause birth defects or other reproductive harm. Wash hands after handling. 
Uniden works to reduce lead content in our PVC coated cords in our products and accessories.

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to 

reduce the risk of fire, electric shock and injury to persons, including the following:

. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or 

laundry tub, in a wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a 

remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a 

fire. They may explode. Check with local authorities for possible battery disposal instructions.

. Do not disassemble any component of this product.

SAVE THESE INSTRUCTIONS
CAUTION!

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according 

to the instructions. Do not open or mutilate the battery, and disconnect the battery before shipping 

this product.

The FCC Wants You To Know

This equipment complies with Part  of the FCC rules and the requirements adopted by the 

ACTA.

On the bottom of this equipment is a label that contains, among other information, a product 

identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the 

telephone company.

Содержание DX14560 DX14561













Отзывы: