54
Room/Baby.Monitor
This feature allows you to monitor sounds in another room. Place a
handset (or the base) in the room you wish to monitor; it will function as
a microphone. Another handset (or the base) can be set to function as a
remote speaker, allowing you to monitor sounds in the room.
Press the
MENU
soft key and enter the Room Monitor menu.
Press the
OK
soft key. TO WHICH UNIT? appears.
Select the handset or base you want to monitor by using
[ ]
or
[ ]
.
Press the
OK
soft key. MONITORING appears on the handset or
the base, and you hear sounds in the room where the handset or
base is installed.
To turn off the Room Monitor, press the
END
soft key or
[ ]
on
either handset or return the handset to the cradle. (or press the
END
soft key on the base.)
If you want to prevent other handsets or the base from monitoring this station, press the
MENU
soft key on the handset or base. Select the HANDSET SETUP menu or the BASE
SETUP menu, and then the ROOM MONITOR submenu. Select OFF and press the
OK
soft key.
Note:
Warning!.
The Baby monitor function is not a replacement for regularly checking
the safety and security of children. The operating time is limited to the remaining
charge of the battery and is not suitable for continuous overnight use.
This feature only works when both handsets are within range of the base.
If the party is out of range, the operation will be canceled.
While a handset and the base are in Room/Baby Monitoring, they cannot be used to make or receive calls;
however, other handsets can still make and receive calls normally.
)
2)
3)
4)
•
•
•
6QYJKEJWPKV!
*CPFUGV
*CPFUGV
$#%-
&'.'6'
1-
6QYJKEJWPKV!
*CPFUGV
*CPFUGV
$#%-
&'.'6'
1-
/QPKVQTKPI
㨭㨭*CPFUGV
'0&
.+0'
.+0'
/QPKVQTKPI
㨭㨭*CPFUGV
'0&
.+0'
.+0'