52
Using.the.DirectLink.Feature
A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This
feature is called DirectLink and will not interfere with the base’s ability to make or receive tele-
phone calls while in use. To activate, you must set both handsets to the DirectLink feature. While
using this feature, these two handsets will not be able to make or receive normal phone calls until
this operation is canceled; however, other handsets will function normally.
Note: If the party is out of range, OUT OF RANGE appears in the display and the operation will
be canceled.
Press the
MENU
soft key and move the cursor to the DIRECTLINK MODE menu.
Press the
OK
soft key. The display shows TO ENTER DIRECTLINK MODE PRESS
[ENTER].
Press the
ENTER
soft key. You will hear a confirmation tone, and DIRECTLINK MODE
COMPLETE appears in the display.
Making.a.DirectLink.Call
To call another handset with DirectLink, press the
DIRECTLINK
soft key.
Move the cursor to select the handset you want to call, and press the
OK
soft key.
If the handset is out of range or not in DirectLink operation, the display shows
OUT OF RANGE.
On the receiving handset, press the
ANSWER
soft key or
[ /flash]
.
Exiting.a.DirectLink.Call
To exit the DirectLink feature and return to standby, press the
CANCEL
soft key and then the
OK
soft key.
DIRECTLINK MODE CANCEL appears in the display.
)
2)
3)
)
2)
3)
& K T G E V . K P M
* C P F U G V
* C P F U G V
$ # % -
& ' . ' 6 '
1 -
& K T G E V . K P M
* C P F U G V
* C P F U G V
$ # % -
& ' . ' 6 '
1 -