Uniden DSS7855 Скачать руководство пользователя страница 74

Страница: 74 / 84

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please

read the following steps.

Case

Action

If the handset or base is

exposed to moisture or

liquid, but it only affects the

exterior plastic housing.

If moisture or liquid has

entered the plastic- housing

(i. e. liquid can be heard in

the phone or liquid has

entered the handset battery

compartment or vent

openings on the base).

Wipe off the liquid, and use as normal.

1) Remove the battery cover and leave it off for ventilation.

2) Remove the battery pack by disconnecting.

3) Leave the battery cover off and the battery pack disconnected for at least 3 days.

4) Once the handset is completely dry, reconnect the battery pack and he battery cover.

5) Recharge the handset's battery pack for 20 hours before using again.

1) Disconnect the AC adapter from the base unit, cutting off electrical power.

2) Disconnect the telephone cord from the base unit.

3) Let dry for at least 3 days.

You must unplug the telephone line while recharging the battery pack to avoid

charge interruption.

DO NOT use a microwave oven to speed up the drying process. This will cause

permanent damage to the handset, base and the microwave oven. After following these

steps, if your cordless telephone does not work, please visit our website for further

information (www.uniden.com.au or www.uniden.co.nz).

Handset:

Base:

IMPORTANT:

CAUTION:

[73]

Содержание DSS7855





















































































Результаты поиска

Содержание DSS7855

Отзывы:

Похожие инструкции для DSS7855

Бренды по названию

Популярные бренды

Uniden DSS7855, Руководство пользователя

Результаты поиска

Содержание DSS7855

Отзывы:

Похожие инструкции для DSS7855

Бренды по названию

Популярные бренды