Uniden DSS 2475 Скачать руководство пользователя страница 50

Страница: 50 / 76

[ 44 ]

Press and hold

on the base to scroll
quickly through the
volume levels.

Adjusting the speaker volume level

When the base speaker is in use, press

on the base to adjust the

volume. Press

for louder or

for softer.

The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.

Using the menu mode

The Menu mode allows you to set the following Answering System functions.

•

To scroll through the menu options, repeatedly press

on the base in the standby mode.

The system returns to standby after the last menu
option. A confirmation tone sounds to indicate the
standby mode.

•

If you press

, the operation is canceled.

•

If the system remains idle for about 5 seconds after
the announcement, the system returns to standby.
Once

/SELECT

is pressed, the

idle time is extended to 10 seconds.

•

If there is an incoming call, the operation is canceled.

•

When you have completed the setting, press

exit the menu mode, or

to move to the

next menu option.

•

You can also set these menus from the handset. See

“

Answering System Setup

”

on page 19 for instructions.

CLOCK/MENU

For your convenience, voice prompts will guide you
through the menu setup mode.

UP308BH (DSS2465) ENG OM 12/28/04 8:26 AM Page 44

Содержание DSS 2475













































































Результаты поиска

Содержание DSS 2475

Отзывы:

Uniden DSS 2475, Быстрый старт, Страница: 50 / 76

Результаты поиска

Содержание DSS 2475

Отзывы: