Uniden DSS 2475 Скачать руководство пользователя страница 21

Страница: 21 / 76

[ 15 ]

Entering the Menu

1) Press the

MENU

soft key in the standby mode.

2) Use

to move the pointer to a

desired main menu (

DirectLink Mode, Handset Setup,

Answ. Setup, Global Setup, and System Reset

3) Press the

soft key to enter the menu. To return to

the previous screen, press the

BACK

soft key.

4) Use

to select a desired submenu,

then press the

soft key to enter.

In the submenu,

is used to select an item. Press the

soft key to

confirm your selection. To return to the previous screen, press the

BACK

soft key. For

detailed instructions, see the following sections for the desired submenu.

5) To exit the menu, press

•

If any of the following occurs during the menu operation, the operation will be cancelled.
- Press

- Press

- Charge the handset.
- Receive an outside/intercom call or page.

•

If the handset remains idle for 30 seconds, the phone will return to the standby mode.

      S U N   1 2 : 0 0 A
      H a n d s e t   # 1
        N e w :     5

CID RDL PB

  D i r e c t L i n k   M o d e
  H a n d s e t   S e t u p
  A n s w .   S e t u p

BACK

SETTING UP THE MENU

For Answering Setup
menu, you can also
set them from the
base (see page 44).

UP308BH (DSS2465) ENG OM 12/28/04 8:23 AM Page 15

Содержание DSS 2475













































































Результаты поиска

Содержание DSS 2475

Отзывы:

Uniden DSS 2475, Быстрый старт, Страница: 21 / 76

Результаты поиска

Содержание DSS 2475

Отзывы: