9
3. Watch the signal strength icon on the handset. Make a
note where the icon drops from 4 bars to 3 bars.
4. Continue walking away from the base. Make a note
where the signal strength icon drops from 3 bars to 2 or
if you start to hear noise on the line (which indicates the
signal is getting weaker).
5. Place the charger anywhere inside the range where the
signal strength icon showed 3 bars and the handset had
a clear signal with no noise.
Testing the location
Connect the charger's AC adapter and make sure the
LINk
light comes on steadily. If the light flashes, the
MULTIRANGE
TM
charger is not getting a good signal from the
base. The charger may be too far away from the base, there
may be interference from electronic devices, or the signal
might be blocked by thick walls or metal objects. Try moving
the charger to another location.
Wall Mounting the MULTIRANGE
TM
charger
If you want mount the charger on the wall, you need to adjust
the desk stand:
1. Pull the locking tab
up and back (see
the black arrow in
the illustration to the
right), and slide the
desk stand straight off.
2. Flip the stand over so
the locking tabs that
say
wall
are facing the
charger with the arrows
pointing down.
