7
Each of these bases can support up to two DRX402
MULTIRANGE
TM
chargers, including any that were supplied
with your phone.
Usually, you can't tell when a handset switches between
the base and the charger in the middle of a call, but
sometimes, you might notice a brief pause in your
conversation.
Registering the MULTIRANGE
TM
charger
Registering the MULTIRANGE
TM
charger is a separate
process from registering the handset. You can use
the charger even if the handset is not registered.
1. On the base, open the menu and select
Register Handset
.
2. On the bottom of the
MULTIRANGE
TM
charger,
press and hold the
registration button until the
LINk
light starts to blink
(about 2 seconds).
3. Release the button and wait
for the
LINk
light to turn on
and steady (this can take
about 90 seconds).
If the
LINk
light doesn't turn on,
disconnect the charger's AC adapter.
Wait about ten seconds, then try these
steps again.
Some important things to remember:
Only register one charger at a time. If more than one
charger is in registration mode at the same time, they can
interfere with each other.
