17
NOTE
NOTE
▼
Call Waiting in Australia
Accessing the Call Waiting Service Using the C Wait Button
1) While talking, you will hear the call waiting signal (series of
beep tones).
2) Press the
c wait
button to switch call and put the current call
on hold.
3) To switch back to original call, press the
c wait
button again.
Accessing the Call Waiting Service Using the Flash Button
1) While talking, you will hear the call waiting signal (series of
beep tones).
2) Press the
flash
button then
2
to switch call and put the current
call on hold.
3) To switch back to original call, press the
flash
button then
1
.
The
flash
+
2
call
waiting procedure toggles
call between the
incoming and the original
call (vice versa).
The
flash
+
1
procedure
will drop the current call
connection and pick up
the incoming call or the
call on hold.
▼
Call Waiting in New Zealand
You must subscribe to Telecom's Call Waiting Service before you
can use this feature. Please call Telecom to check on the availability
of this feature in your area.
Accessing the Call Waiting Service Using the C Wait or
Flash Button
1) While talking you hear the Call Waiting beep signal.
2) Press the
c wait
or
flash
button. This feature sends a 600mS
timed “hook-flash” on the telephone line for accessing services
such as Call Waiting, etc.
You must subscribe to
Telecom's Call Waiting
Service before you can
use this feature.
CALL WAITING
DG 910 operating guide 2/3/99 12:55 PM Page 17
