2
Using Multiple Bases
The.handsets.supplied.with.your.phone.can.be.registered.to.a.total.of.four.different.bases..Compatible.bases.include.
the.DECT500.series,.the.DECT2000.series,.and.the.DECT3000.series..Once.your.handset.is.registered.to.more.
than.one.base,.you.can.set.the.handset.to.search.automatically.the.available.base,.or.you.can.select.manually.which.
base.the.handset.should.connect.to.(for.example,.if.you.have.one.base.with.an.answering.machine,.you.can.tell.the.
handset.to.connect.that.base.to.check.messages)..
Note: To confirm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step
.of.Selecting.the.base.on.page.2)..Press.
[ ]
.to.close.the.list.and.return.to.standby.
Registering the Handset to Another Base
To.register.a.handset.to.another.base:
Make.sure.the.handset.battery.is.fully.charged.
If.the.other.base.has.an.LCD.display:
With.the.phone.in.standby,.press.
[Menu/Select]
.on.the.base..Move.the.cursor.to.select.the.REGISTER.
HANDSET.menu,.and.then.press.
[Menu/Select]
..HANDSET.REGISTERING.will.appear.
If.the.other.base.
does
.
not
.have.an.LCD.display:.
Disconnect.the.base.AC.adapter..Then.press.and.hold.
[find hs]
.or.
[find]
.while.you.reconnect.the.adapter..
Keep.pressing.
[find hs]
.or.
[find]
.until.the.charge.LED.starts.to.blink.
On.the.handset,.press.
[Menu/Select]
..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display..(After.step.2,.you.have.thirty.seconds.to.complete.this.step.3.before.the.system.returns.to.
standby.)
Wait.approximately.thirty.seconds..REGISTRATION.COMPLETE.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
Selecting the Base
When.your.handset.is.registered.to.another.base,.it.will.automatically.connect.to.the.base..A.base.ID.(that.is.for.the.
handset.only).will.be.assigned.in.the.order.of.registration..You.can.either.select.a.base.you.want.to.use.manually,.or.
set.to.AUTO..If.you.set.to.AUTO,.when.the.handset.comes.out.of.range,.it.searches.automatically.the.available.base.
in.order.of.base.ID.
)
2)
•
•
3)
4)
UC536BV(DECT2080-2) OM.indb 21
3/24/2008 4:53:58 PM