41
Using the Intercom
You can use the intercom to talk to another station without using the phone line.
Making an Intercom Page
From the base
From the handset
1. With the phone in standby, press
[int'com]
(
[hold/
int'com/xfer]
on the dual-keypad base). All other
stations will be paged. (On the dual-keypad base, press
[1]
through
[4]
to select the handset you want to talk
with or press
[*/tone]
to page all other stations.)
2. To cancel the intercom page, press
[int'com]
(
[hold/int'com/xfer]
on the dual-keypad base).
1. With the phone in standby, press
[xfer/intercom]
.
2. Use
[
]
or
[
]
to select the station you
want to talk with, then press
[select/
]
.
Select ALL to page all other stations.
3. To cancel the intercom page, press
[ ]
.
Note: Intercom paging will be canceled if any of the following things occur:
--You receive an outside call or an intercom page while selecting the other handset.
--You do not select a handset within 30 seconds.
--The party does not answer the page within one minute.
--The party is busy.
--The party is out of range (UNAVAILABLE appears in the display).
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the station that is paging.
1. From the handset, press
[ / flash]
or
[xfer/intercom]
. If AutoTalk is on, the handset will automatically answer
the page when you remove the handset from the cradle.
2. From the base, press
[int'com]
(
[hold/int'com/xfer]
on the dual-keypad base)
or
[speaker]
.
3. To hang up an intercom page from the handset, press
[ ]
. To hang up an intercom page from the base
,
press
[int'com]
(
[hold/int'com/xfer]
on the dual-keypad base).
