–
5
–
3
Make sure the
charge
LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger charging contacts.
•
Use only the supplied AD-310 AC adapter. Do not use
any other AC adapter.
• Place the charger close to the AC outlet so that you can
unplug the AC adapter easily.
Register the Handset
YOU NEED TO REGISTER THE DCX640 TO THE MAIN BASE BEFORE USE!
1
Before registering the handset,
the battery pack must be charged
for 15-20 hours.
2
Place the extra handset
in the main base unit to
begin registration. (Picture is the
DCT646 series main base.)
3
While the handset is registering,
H an d se t Re g is te r in g
will
appear in the LCD. When
R eg i st r at i on C o mp l et e
is displayed, the handset has
been registered to the base.
If
R eg is t ra t io n F ai l ed
appears, please try these
steps again.
• The handset can be registered when the main base is in
standby mode.
•
Standby Mode
- The handset is not in use and
talk/flash
has not been pressed.
Using the DCX640 with the
Integrated Answering Device
If the original unit has a built-in answering system, you can check
your new messages, skip, repeat, or delete your messages with the
DCX640 handset. For more detailed instructions, see the owner’s
manual supplied with the original unit.
4 G I K U V T C V K Q P
% Q O R N G V G
* C P F U G V
4 G I K U V G T K P I
DCX640
Handset
DCX640
Handset
Charger
Main Base
DCX640 Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the DCX640
handset in the main
base to register.
1
2
3
UU844BH(DCX640) OM.fm 5 ページ ２００３年１０月２２日 水曜日 午後４時４６分
