background image

P R E C A U T I O N S   &   WA R R A N T Y [ 75 ]

PRECAUTIONS &

W

ARRANTY

Precautions!

Before you read anything else, please observe the following:

Warning!

Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit, DO NOT expose this unit to rain or moisture. 

Rechargeable Nickel-Metal-Hydride Battery Warning

• This equipment contains a rechargeable Nickel-Metal-Hydride battery.
• Nickel is a chemical known to state of California to cause cancer.
• The rechargeable Nickel-Metal-Hydride battery contained in this

equipment may explode if disposed of in a fire.

• Do not short-circuit the battery.
• Do not charge the rechargeable Nickel-Metal-Hydride battery 

used in this equipment in any charger other than the one 
designed to charge this battery as specified in the owner’s 
manual. Using another charger may damage the battery or 
cause the battery to explode.

Rechargeable Nickel-Metal-Hydride
Batteries Must Be Recycled or
Disposed of Properly

Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.

WARNING:

The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. 

Wash hands after handling.

Important Safety Instructions

When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a

dry cloth for cleaning without liquid or aerosol cleaners.

4. Do not use this product near water; for example, near a bathtub,

wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.

5. Do not place this product on an unstable cart, stand, or table.

The telephone may fall, causing serious damage to the unit.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.

7. This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your dealer or local
power company.

8. Do not allow anything to rest on the power cord. Do not locate

this product where the cord will be damaged by persons walking
on it.

9. Do not overload wall outlets and extension cords, as this can

result in the risk of fire or electrical shock.

10. Never push objects of any kind into this product through cabinet

slots, as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.

11. To reduce the risk of electric shock, do not disassemble this product.

Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.

12. Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the 

operating instructions. (Adjust only those controls that are 
covered by the operating instructions. Improper adjustment 
of other controls may result in damage and will often require 
extensive repair work by a qualified technician.)

E. If the product has been dropped or the cabinet has 

been damaged.

F. If the product exhibits a distinct change in performance.

13. Do not use the telephone to report a gas leak in the vicinity of

the leak.

Additional Battery Safety Precautions

Caution!

To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:

1. Use only the batteries specified in the owner’s manual. 
2. Do not dispose of the batteries in a fire. The cell may explode.

Check the Nickel Metal Hydride battery disposal package insert for
disposal instructions.

3. Do not open or mutilate the batteries. Released electrolyte is

corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.

4. Exercise care in handling the battery in order not to short the

battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.

5. Charge the batteries provided with or identified for use with this

product only in accordance with the instructions and limitations
specified in the owner¬s manual provided for this product.

6. Observe proper polarity orientation between the batteries and

battery charger.

SAVE THESE INSTRUCTIONS!

Important Electrical Considerations

Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.

The FCC Wants You To Know

Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner’s manual, could void your authority to operate this
product. Your telephone complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the REN to
your telephone company. Both numbers are on the base unit.

Note:

You must not connect your phone to:

• coin-operated systems
• most electronic key telephone systems

Range

Your new phone is designed to achieve the maximum possible range
by transmitting and receiving according to the highest specifications
set forth by the FCC. We have rated this phone to operate at a
maximum distance with the qualification that the range depends upon
the environment in which the telephone is used. Many factors limit
range, and it would be impossible to include all the variables in our
rating. The Maximum Range rating of this phone is meant to be used
as a means of comparison against other range claims.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

DCT5280_UP302BH UP01302BA_1  5/23/03  1:57 PM  Page 75

Содержание DCT5280





















































































Отзывы: