28 - English
service center for a defect or malfunction covered
by this warranty, (E) used in any conjunction
with equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed or
programmed by anyone other than as detailed by
the owner's manual for this product.
STATEMENT OF REMEDY: In the event that
the product does not conform to this warranty
at any time while this warranty is in effect, war-
rantor will either, at its option, repair or replace
the defective unit and return it to you without
charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or
its representatives in connection with the perfor-
mance of this warranty. Warrantor, at its option,
may replace the unit with a new or refurbished
unit. THE LIMITED WARRANTY SET FORTH
ABOVE IS THE SOLE AND ENTIRE WARRAN-
TY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES OF ANY NATURE WHATSO-
EVER, WHETHER EXPRESS, IMPLIED OR
ARISING BY OPERATION OF LAW, INCLUD-
ING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE
FOR THE REIMBURSEMENT OR PAYMENT
OF INCIDENTAL OR CONSEQUENTIAL DAM-
AGES. Some states do not allow this exclusion or
limitation of incidental or consequential damages
so the above limitation or exclusion may not
apply to you.
LEGAL REMEDIES: This warranty gives you
specific legal rights, and you may also have other
rights which vary from state to state. This war-
ranty is void outside the United States of America
and Canada.
PROCEDURE FOR OBTAINING PERFOR-
MANCE OF WARRANTY: If, after following
the instructions in the owner's manual you are
certain that the Product is defective, pack the
Product carefully (preferably in its original
packaging). Disconnect the battery from the
Product and separately secure the battery in its
own separate packaging within the shipping
carton. The Product should include all parts and
accessories originally packaged with the Product.
Include evidence of original purchase and a note
describing the defect that has caused you to return
it. The Product should be shipped freight prepaid,
by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
As an Energy Star® Partner,
Uniden has determined that this
product meets the Energy Star®
guidelines for energy efficiency.
Energy Star® is a U.S. registered
mark.
x
Uniden® is a registered trademark of Uniden
America Corporation.
x
The pictures in this manual are for example only.
Your phone may not look exactly like the pictures.
Minimum size: 0.375 in wide (9.525 mm)
Minimum drawing size (with clear space) = 0.555 in (14.1 mm) wide
