English - 23
dialing in to Your system
1. Call your phone number & wait until the system answers. (If the system is turned off, it
answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
0
and
immediately
enter your security code. If you enter
it incorrectly three times, the system hangs up and returns to standby.
3. The system announces the time, the number of messages in memory, and a help prompt. It
beeps to let you know it's waiting for a command.
4. When you hear beeping, enter a two-digit command from the chart.
#
if you don't press
any keys for 15
seconds, the
system hangs
up and return to
standby.
imPoRtant infoRmation
solVinG PRoblems
If you have any trouble with your phone, check this section first. If you need help, call our
Customer Care Line listed on the front cover.
General problems
Possible solutions
No stations can make or
receive calls.
x
Check the telephone cord connection.
x
Disconnect the base AC adapter for a few minutes; then
reconnect it.
A handset can’t make or
receive calls.
x
Move the handset closer to the base.
The corded handset can
make calls but the cordless
handset(s) cannot.
x
Check the power connection to the base. If the base
is unplugged or the power goes out, only the corded
handset can make and receive calls.
A station can make calls, but it
won’t ring.
x
Make sure the ringer is turned on.
x
Make sure Silent mode is turned off (see page 19).
A handset is not working.
x
Charge the battery for 15-20 hours.
x
Check the battery connection.
The phone keeps ringing
when I answer on an
extension.
x
You may have to change the line mode. Contact
Customer Service for instructions.
audio issues
Possible solutions
Callers sound
weak or soft.
x
Move the handset closer to the base.
x
Keep the handset’s battery fully charged.
x
Increase the earpiece volume.
01
Repeat message
05
Stop playback
02
Play message
06
Turn the system on
03
Skip message
09
Turn the system off
04
Delete message
10
Hear help prompts
