![Uniden D1788 Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/uniden/d1788/d1788_user-manual_3967896023.webp)
English - 23
Answering system problems Possible solutions
My outgoing message is gone.
x
If there was a power failure, re-record your
personal outgoing message.
I can’t hear the base speaker.
x
Make sure call screening is turned on.
x
Change the base speaker volume.
Messages are incomplete.
x
Increase the
Record Time
.
x
Delete messages (memory may be full).
The system keeps recording when
I answer on an extension.
x
You may have to change the line mode.
Contact Customer Service for instructions.
Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone
line from causing interference on your phone. To get a line filter, contact
your service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the filter.
Make a test call to make sure the noise is gone.
Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter
and phone cord from the wall before touching it.
If the liquid is only on the exterior housing of the base or handset, wipe it
off and use as normal. If you can hear liquid inside the housing:
1. Remove all compartment covers, and disconnect all cables and cords.
2. If liquid is leaking from any vent or hole, turn the phone so that the
leaking vent faces down. If not, place the largest vent face down.
3. Let dry for at least 3 days. Check for liquid inside the phone before
replacing compartment covers & reconnecting cords.
Resetting Stations
Unplug the base to reset it. Plug it back in after at least a minute.
If you have trouble with a handset or if you want to replace one, clear the
registration information from the base and the handset:
1. Press & hold
enD
and
#
at the same time until you see the
System Reset
menu.
2. If you still have the base the handset is registered to, select
Deregister
HS
, then select the handset you want to reset. If you don’t have that base
anymore, select
Base Unavailable
.
3. To confirm, select
Yes
. The handset displays
Handset not registered
.