21
If Key Beep is active, the microphone beeps
each time the channel changes.
Adjust Squelch
1. Press the knob on the radio until
SQL
displays.
2. Turn the konb to increase and decrease the
squelch level. There are 8 squelch levels,
from 0 to 7.
Set Squelch to 0 to have the radio monitor the
current channel for transmissions.
Automatic Noise Limiter (
ANL/HI-CUT
)
ANL (Automatic Noise Limiter) detects static
noise peaks and clips those peaks to preserve the
integrity of the received signal. HI-CUT (High Cut)
attenuates signals higher than a specific threshold.
You can set either ANL or HI-CUT on individually,
or both of them on at the same time. If both are
turned on, both icons,
and
, display on the
LCD.
1. Press
ANL/HI-CUT
(on top of the
microphone) once. ANL on;
ANL
displays for
a moment on the LCD and the
icon stays
on.
2. Press
ANL/HI-CUT
again; the icon goes away
and ANL is turned off
3. Press and hold
ANL/HI-CUT
(on top of the
microphone). HI-CUT is on;
HC
displays for a
