•
2.7” screen
•
Recording to microSD card
•
G-Sensor with Collision Detection
Mode
•
GPS Built In
WHAT’S IN THE BOX
•
Camera/Recorder
•
HDMI Cable
•
Car Adapter
•
Owner’s Manual
•
MiniUSB-USB Cable
•
Windshield Mount
If any items are missing or damaged, contact our Customer Care Line
immediately at 800-297-1023. Never use damaged products!
Need help? Get answers 24/7 at our website:
www.uniden.com
.
CONTROLS AND INDICATORS
microSD slot
Locking ring
Lens
HDMI Jack
Mode
or Menu
OK
(Record start/stop
Select item)
Scroll
down
Power on LED
Camera release
latch
AV out
USB
Scroll
up
Camera
Shutter
Power
On/Off
INSTALLING THE CAM650
Installation Safety Warnings
WARNING! Failure to comply with the following warnings could result in an
accident or collision, resulting in death or serious injury.
Do not obstruct the driver’s view or the operation of the vehicle itself.
Do not place it unsecured on the dashboard or in front/above an airbag.
Do not mount the camera where it will become a distraction if it becomes loose.
Do not attempt to operate the camera while driving. If you need to access the
CAM650 to change settings, etc., pull off the road in a safe manner to do so.
Some state laws prohibit drivers from mounting anything on the windshield,
or restrict mounting to specific areas of the windshield. It is the owner’s
responsibility to mount the CAM650 in compliance with local laws.
1. Slide the CAM650 onto the bracket hook on the top of the windshield mount until
it locks into position.
2. Be sure the locking ring is set to
UNLOCK
. Press the suction cup base to the
windshield.
3. Turn the locking ring to
LOCK
. Make sure the stand is locked to the windshield.
4. Connect the car adapter to the unit and to the cigarette lighter power jack.
5. Press
POWER
to turn the unit on and check the view. Adjust the angle if
needed.
6. To unmount the stand, turn the locking ring to the
UNLOCK
position then lift the
plastic flap on the base to release it from the windshield.
OPERATION
SET UP THE CAM650
If you are recording (red dot on the screen is flashing), press REC OK to stop
recording. You cannot enter the menus if CAM650 is recording.
Select a mode and then use the menus for that mode to set up your camera. Press
MODE
to select a mode [Video, Still (photo), or Playback] and then press and hold
MODE
for a moment to display the menus for that mode. The menus for Video and
Still have 2 options – that mode plus Setting. Playback has three options; you can
delete or protect files on the microSD card (not included - class 10 microSD card
recommended), or you can watch the recorded files in a slideshow.
Press
to toggle between the menus, and use ► and ◄ to scroll thorugh the
menu selections. Press
REC OK
to select a menu option.
Video Mode
Press
MODE
until
displays in the upper left corner of the screen. Press and
hold
MODE
momentarily to display the Video menu options and press
to toggle
between the menus. Press ► and ◄ to scroll thorugh the menu selections. Press
REC OK
to select a menu option.
VIDEO MENU
SETTING MENU
Resolution
Date/Time
Loop Recording
Car/Driver ID
Exposure
Auto Power Off
Motion Detection
Key Click Sound
- 3 -
- 2 -
