Uniden BW3451R+1, Руководство пользователя

Страница: 18 / 44

18
To... Do...
Change between quad view,
single view, and scan for Live
view
Press CH► to cycle through the Live modes in
the following order:
CAM1—CAM2—CAM3—CAM4—QUAD—
AUTO Scan — CAM1
Check the temperature The temperature displays on the monitor screen
when the camera is in full screen mode.
Turn on the night light Press NIGHT LIGHT on the top of the monitor
See page 37 for details.
Set the date and time See page 20.
Set the room temperature
range for the temperature alert
See page 22, 23.
Use the Lullaby function See page 37.
Record Video See page 36.
Play back video See page 36.
Delete video See page 36.
Adjust the monitor volume Press ▲Vol (increase volume) or ▼Vol (decrease
volume) on the monitor or turn the volume switch
on the camera.
Use the Intercom 1. Press and hold TALK on the monitor.
2. Speak into the microphone.
3. Release to hear reply.
Viewing Modes
Live view displays live images from the cameras in the following modes:
• Quad mode: Monitor displays video from all cameras on a single screen in 4
quadrants. Any channel that does not have a camera is blank.
• Single mode: Monitor displays video from one camera at a time.
• Scan mode: Monitor displays video from one camera at a time, but cycles
through all cameras one by one.
Use CH► or CH◄ to cycle through these modes.
#
Your system comes with a two cameras; therefore, it only displays in Single
mode in Live view or a single quadrant in Quad view.
USING THE B 1