Uniden BT230, Руководство пользователя

Страница: 14 / 20

1
If... Try...
The headset paired with
my phone, but I can’t hear
anything through it.
Making sure the call connected and is still active.
Making sure the phone transferred the call to the headset. Press and hold
MFB
for two seconds to transfer the call.
•
•
The headset keeps beeping,
and I don’t know why.
Seeing if the battery is getting low. If the LED is blinking red, charge the
battery.
•
I can hear the caller, but the
audio is very weak or soft.
Turning the speaker volume up.
Moving closer to your phone (if you aren’t carrying it).
Keeping the battery fully charged; As the battery starts to run out, the speaker
gets softer.
•
•
•
reset the Headset
NOTE: Before resetting the headset, make sure the headset is not connected to any mobile
phones (e. g. headset is in connectable mode).
Press and hold
MFB
+
Down
for seconds. The LED flashes 5 times and the
headset beeps. Once the headset is reset, all the mobile phone links are deleted.
General InformatIon
You cannot use the headset while it is recharging.
Bluetooth wireless devices have a maximum range of 0 feet (10 m); the actual range varies depending on
current conditions (obstacles, battery power, interference, etc.).
•
•