7
Do not use the
pA
function unless an external speaker is connected.
4.
NB+ANL/ANL/OFF
switch: Activates the Noise Blanker (
NB
) and
Automatic Noise Limiter (
ANL
) features.
NB
reduces external
noise and
ANL
reduces background noise from the car engine
and other sources.
OFF
turns off both the
NB
and
ANL
features.
5.
9/19/NORM
switch: Move the switch to select emergency
channel 9, channel 19, or standard CB channels.
All channels except Channel 9 may be used for normal communication.
The FCC reserves Channel 9 for emergencies involving the immediate
safety of individuals or protection of property. Use Channel 9 to render
assistance to a motorist.
6.
HIGH/MED/LOW
switch: Adjust LCD backlight and all
illuminations brightness.
7.
RX/TX
LED: Indicates whether the radio is transmitting (red) or
receiving (yellow-green).
8. Channel Indicator: Displays the channel currently in use.
9. 6-Pin Microphone Jack: Connects the radio to the detachable
microphone (included).
10. Channel Selector knob: Turn this knob to select CB or Weather
channels.
11.
RF
Gain inner knob: Turn the inner knob to reduce interference in
strong signal areas.
12.
MIC
Gain outer knob: Turn the outer knob to adjust the
microphone sensitivity.
13.
CAL
inner knob: Turn the inner knob to calibrate the meter for
Standing Wave Ratio (SWR) measurements.
14.
TONE
outer knob: Turn the outer knob to change the tone quality.
15.
VOL
inner knob: Turn the inner knob to turn the radio on and off
and to adjust the volume.
16.
SQUELCH
outer knob: Turn the outer knob to reduce background
noise when there is no incoming signal.
