Uniden Bearcat PC68LTX, Руководство пользователя

Страница: 9 / 20

9
Negative Ground System
With a negative ground system, the negative (-) battery terminal is
usually connected to the vehicle motor block.
Connect the red DC power cord from the
transceiver to the positive (+) battery terminal
or other convenient point. Then connect the
black power cord to the vehicle chassis or negative (-) battery terminal.
USING YOUR PC68LTX
TURN PC68LTX ON/OFF
Turn the
VOLUME
knob clockwise until the unit turns on and the display
backlight turns on.
Turn the
VOLUME
knob counter-clockwise to turn the unit off.
CB MODE
Be sure that the power source, antenna, and microphone are properly
connected before proceeding.
1. Turn unit on. Set volume to a comfortable level.
2. Set switch to
CB
.
3. Turn the CH knob to select a CB channel.
4. Set noise limitations switch to
NB/ANL
.
5. Adjust squelch.
• Turn SQUELCH knob fully clockwise so only strong signals can
get through.
• Turn SQUELCH knob fully counterclockwise until you hear a
hiss. Everything gets through - noise, weak signals, and strong
signals
• Turn SQUELCH knob clockwise until the hiss stops. Only
clearer signals get through.
Set SQUELCH only when the radio is not receiving a strong signal.
6. Press and hold
PTT
and check the multifunction meter. It will
show the RF output power.
7. Turn RF GAIN knob to set RF gain sensitivity. Normally, the knob is