Uniden Bearcat PC68LTX, Руководство пользователя

Страница: 10 / 20

10
turned clockwise to maximum.
8. Turn
MIC GAIN
knob to adjust microphone sensitivity for
transmission. Normally, the knob is turned clockwise to
maximum.
9. Set the brightness (
BRT
or
DIM
).
PA MODE
Using the PA mode requires an optional speaker.
1. Switch to
PA
.
2. Press and hold PTT to speak.
3. Release when finished.
To prevent acoustic feedback, separate the microphone from the speaker
when operating the PA at high output levels.
If you are in PA mode but not pressing PTT, the radio receives CB
transmissions and transmits them through the PA speaker. You cannot
respond to the transmission.
HI CUT/OFF
The Hi Cut function reduces high frequencies. Switch to
HI CUT
to turn
off higher frequencies.
TO TRANSMIT/RECEIVE
Perform a voltage Standing Wave Ratio (SWR) measurement prior to using
the transmitter. An SWR ratio in excess of 2:1 may damage the transmitter.
Be sure to read and understand Part 95, FCC Rules and Regulations before
operating your transmitter.
1. Select a channel.
2. Adjust
MIC GAIN
.
3. When the channel is clear, press the microphone
PTT
and speak.
4. Release PTT when you are finished speaking to listen for the
response.