E-11
Selector
clockwise to move to the next channel or counter-
clockwise to move to the previous channel. The radio
continues scanning in the selected direction.
• To change to Memory Channel Scan mode, press
MEM/SCAN
while in All Channel Scan mode (see page 10).
3. To exit All Channel Scan mode, press
PTT
,
9/19/NORM
,
WEATHER
,
or
CB/PA
.
Weather moDe (WX moDe)
Your radio combines a CB radio with a Weather radio and a Weather
Alert system. The Weather Alert system sounds a 7-second signal in the
event of severe weather when in CB mode. The Weather radio continually
broadcasts weather conditions when you are in Weather mode.
1. Press
WEATHER
. Your radio is now in Weather radio mode.
2. Select 1 of 7 weather channels using
Channel Selector
.
You cannot change ANL or NB settings while in WX mode. The radio will
sound an alert tone.
Set Weather Scan Mode
Weather Scan mode allows the radio to move to the next weather
channel if no signal is detected after 3 seconds. Set Weather Scan mode
to
ON
or
OFF
through the menus.
1. Press
MENU/OK
to activate the menus.
COLOR
displays.
2. Turn the
Channel Selector
knob to cycle through the menu op-
tions until
WXSCAN
displays.
3. Press
MENU/OK
.
ON
displays.
4. Press
MENU/OK
to set Weather Scan mode to
ON
or turn the selec-
tion knob until
OFF
displays and then press
MENU/OK
to set it.
WXSCAN
displays again.
If Weather Scan is
ON
when you turn off the radio, it remains
ON
.
