Uniden BCD325P2, Руководство пользователя

Страница: 59 / 132

59
To Program an ID into an Existing Group
1. In Scan Mode Hold on any channel.
2. Enter the ID (see Entering IDs) and press
E/yes
.
3. At ‘Quick TGID Save?’ press .no .
4. At ‘Select System’ scroll to the system where you want to store the ID and
press E/yes .
5. At ‘Select Group’ scroll to the group where you want to store the ID and press
E/yes .
Note: If the ID is already stored in the group, ‘TGID Exists Accept? (Y/N)’
appears. Press .no to return.
After storing the ID, you will be at the ‘Edit Channel’ menu to complete the settings
for the new channel. If you don’t want to edit the channel settings or are done editing
the channel, press L/O to return to ‘Hold’ to enter another ID or Scan to exit.
MANUALLY PROGRAMMING CHANNEL FREQUENCIES/TGIDS
To Program a New Channel press Menu .
1. At ‘Program System’ press E/yes .
2. At ‘Select System’ scroll to system where you want to program a channel and
press E/yes .
3. Scroll to ‘Edit Group’ and press
E/yes
.
4. At ‘Select Group’ scroll to the group that you want to program the channel in
and press
E/yes .
5. Scroll to ‘Edit Channel’ and press E/yes .
6. At ‘Select Channel’ scroll to ‘New Channel’ and press E/yes .
7. At ‘Input Frequency (or TGID)’ enter the frequency or ID and press E/yes .
See also Set ID Format and Entering IDs.
To enter a Conventional Frequency, enter the frequency and press E/yes .
To enter a Motorola Type II ID enter the ID and press
E/yes
.
To enter a Motorola Type I ID enter the fleet number, press .no once for a hyphen,
then enter the subfleet and press E/yes .
Note: If you omit the user ID (still need the hyphen), the scanner treats this
field as a wildcard (will treat the home repeater as 1 ID). You can also lock out
this home repeater ID so you will not receive it.
To enter a Motorola I-Call ID, press .no once then enter the ID and press E/yes .