To directly access a specific channel:
1.
Press
m
.
2.
Use your keypad to enter the channel number you want.
3.
Press
m
again.
Setting the Delay Mode
A delay can be set for each programmed channel so that when Scan or Search stops on a channel
there is a brief pause before the scanning cycle resumes. Delay must be set for each programmed
channel, and it can be set when your scanner pauses during a scan or when manual mode is
selected.
To set Delay in Scan or Search Mode:
1.
Press
s
or set a search range and
press
S
.
2.
When your scanner stops on a channel,
press
Y
.
DELAY
displays and scanning will resume
two seconds after the transmission ends.
To set Delay in Manual Mode:
1.
Press
m
.
2.
Select the channel you want using your
keypad or Rotary Tuner.
3.
Press
Y
.
DELAY
displays indicating the scanner will
pause on the channel when a
transmission is received.
23