45
Enabled scan banks appear on the lowest line. Disabled scan
bank numbers are not displayed. The currently scanned bank
number flashes.
• You can turn scan banks on/off by pressing 1-9 or 0, but one
scan bank must always be enabled. If you turn off all scan
banks, the scanner will display
Nothing to Scan
.
• If you want to change the search direction or if it is a long
transmission and you want to continue scanning, turn the
SCROll CONTROl or press Scan.
When the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes scanning according to
the delay setting for each channel.
• To hold on a channel, press Hold.
• To step through the channels, turn the SCROll CONTROl in
Hold
mode. Press Hold to resume.
While monitoring a transmission, the upper line displays the
current bank and bank channel number (or name if tagged) and
the lower line displays the channel number in the scanner and
frequency with the direction indicator (
↑
or
↓
).
P
appears in the display if it is a priority channel. The
modulation,
Priority
mode icon (if Priority is enabled), and the
Close Call icon (if CC Pri or CC-DND is enabled) also displays.
Any CTCSS/DCS received blinks in CTCSS/DCS search and
appears solid if programmed.
Numbers at the bottom of the display show the selected scan
banks. The currently scanned bank number flashes in
Receive
mode.
