41
•
CTCSS/DCS
Search - the scanner displays any tone/
code being used, but opens squelch on any signal.
•
No Tone
- indicates that the channel squelch will only
open if no CTCSS/DCS is detected.
•
<Back
- returns to
Channel
Menu.
Note:
If you select
Off
,
CTCSS/DCS Search
, or
No Tone
,
the scanner returns to the channel menu. If you selected
CTCSS
or
DCS
, you can then select the
CTCSS
tone or
DCS
code.
5. Scroll to select, then press Pgm/E to save and return to the
Channel
menu.
setting.channeL.ModuLation
1. To select a channel, press Hold and then enter the channel
number.
2. Press Pgm/E to enter the
Channel
menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to select
Set Modulation
and press Pgm/E.
4. Scroll to select modulation from the following options
(Default = Auto):
•
Auto
- the scanner selects the modulation automatically
based on the frequency’s band.
•
AM
- the scanner uses AM modulation.
•
NFM
- the scanner uses Narrowband FM modulation.
•
FM
- the scanner uses FM modulation.
5. Press Pgm/E to save and return to the
Channel
menu.