3
Getting to know your App Cam XLight
Note:
The top cap can be opened with the pry bar included in the kit.
Press the
Reset/WPS
button to enable WPS.
Press and hold the
Reset/WPS
button for 10 seconds to reset the camera.
Step 1:
Mark and drill holes on the
installation surface (wall or ceiling).
Step 2:
Insert the expansion bolt into
the hole.
Step 3:
Open the bracket and pull the
power cable through the cable tray on the
bottom of the bracket.
Step 4:
Align the screw holes on the
bracket to those on the mounting surface,
then fasten the installation screws.
Step 5:
Secure the other half of the
bracket to the camera, then adjust the
power cable and secure the bracket.
App Cam XLight Installation
Содержание App Cam X55
Страница 31: ...2018 Uniden Australia Pty Limited Version 1 0...
