Uniden 9322402015538 Скачать руководство пользователя страница 50

Страница: 50 / 52

Warranty

UNIDEN XTRAK

UHF CB Transceiver

UHF CB Transceiver

UNIDEN XTRAK 80

IMPORTANT: Satisfactory evidence of the original purchase is required for

warranty service

Please refer to our Uniden website for any details or warranty durations offered in

addition to those contained below.

Warrantor:

The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden”).

Terms of Warranty:

Uniden warrants to the original retail purchaser only that the

XTRAK 80 UHF CB Transceiver (“the Product”), will be free from defects in materials

and craftsmanship for the duration of the warranty period, subject to the limitations and

exclusions set out below.

Warranty period:

This warranty to the original retail purchaser is only valid in the original

country of purchase for a Product first purchased either in Australia or New Zealand.

Product

5 Years

Accessories

1 Year

If a warranty claim is made, this warranty will not apply if the Product is found by Uniden

to be:

(A) Damaged or not maintained in a reasonable manner or as recommended

in the relevant Uniden Owner’s Manual;

(B) Modified, altered or used as part of any conversion kits, subassemblies or

any configurations not sold by Uniden;

Owner’s

Manual

(D) Repaired by someone other than an authorized Uniden Repair Agent

in relation to a defect or malfunction covered by this warranty; or

(E) Used in conjunction with any equipment, parts or a system not

manufactured by Uniden.

Parts Covered:

This warranty covers the Product and included accessories.

User-generated Data:

This warranty does not cover any claimed loss of or damage to

user-generated data (including but without limitation phone numbers, addresses and

images) that may be stored on your Product.

Statement of Remedy:

If the Product is found not to conform to this warranty as stated

above, the Warrantor, at its discretion, will either repair the defect or replace the Product

XTRAK 80 OM_First Lot_print_r5.indd 50

4/06/2021 1:30:52 PM

Содержание 9322402015538





















































Результаты поиска

Содержание 9322402015538

Отзывы:

Похожие инструкции для 9322402015538

Бренды по названию

Популярные бренды

Uniden 9322402015538, Руководство пользователя

Результаты поиска

Содержание 9322402015538

Отзывы:

Похожие инструкции для 9322402015538

Бренды по названию

Популярные бренды