User Guidebook
WPU-7800G
© UniData Communication Systems, Inc. All rights reserved.
Page 3 of 7
Data flow
1.
Power On
2.
Network Binding
☞
General Provision Server Address can be set up by using BOOTP option 66. (DHCP server should provide
BOOTP option 66.)
3.
Connection General Provision Server
☞
Try to access Server via APS address that has been set up.
4.
Download Common Configuration file
☞
Download e1_common.ini.
5.
Download User Configuration file
☞
Download e1_MAC.ini.
6.
Set Configuration and Version check
☞
Apply e1_common.ini and e1_MAC.ini to WPU-7800G.
Compare firmware version of e1_common.ini and that of WPU-7800G.
Do step 7 and 8 if firmware version of e1_common.ini is higher than that of WPU-7800G.
7.
Firmware download
☞
Download firmware.
8.
Rebooting
☞
Apply new firmware to WPU-7800G by rebooting.
9.
SIP REGISTER
☞
Try REGISTER with registered SIP Proxy.
2.
Auto Provision Server Protocol (HTTP, HTTPS, TFTP)
2.1 Protocols that are available in Auto Provisioning
1.
HTTP (HyperText Transfer Protocol)
2.
HTTPS (HyperText Transfer Protocol over Secure Socket Layer)
3.
TFTP (Trivial File Transfer Protocol)
2.2 Programs that are available.
Protocol
OS
Program
HTTP
Windows
Apache Web Server
Linux
HTTPS
Windows
Apache Web Server
Open-SSL / Mod-SSL
Linux
TFTP
Windows
3CDeamon
Linux
TFTP
