Manual – 3000 NRL Family
Unidata Manual - 3000 NRL Family - 17 09 2018.docx
Page 11
2.6
Firmware Update Indication
While the logger is transferring firmware update data from either Neon, or an MMC/SD
card, the logger will continue to operate as normal until the firmware data has been fully
downloaded and verified.
Once verified, the firmware data will be flashed, which may take up to 20 seconds. For the
duration of that the logger is unable to perform any other operation. All LEDs (except the
USB LED) will turn red to indicate the logger is unavailable.
3.0
NRL STATUS MENU SCREENS
In the 3000 NRL Family some models are equipped with an LCD Display and keypad as
standard, while other models may have a display and keypad as an optional extra.
The logger status screen(s) enables the user to inspect the current status of a range of
logger status parameters. To access the logger status screen press the
ENTER
button (if
the logger display is sleeping) and then press the
LOGGER STATUS
button on the LCD
touch display.
There are two streams of Logger Status data. You can toggle between these by again
pressing the
LOGGER STATUS
button. The status values that can be displayed are as
below:
Parameter Details
Logger Name
NRTID NRT
ID
number.
SER# Logger
serial
number.
Time / Date
Current logger time & date.
MAIN
Main power supply input voltage.
AUX
Auxiliary power supply input voltage.
RTCC
Internal Real Time Clock battery voltage.
Temp
Current logger internal temperature.
Baro
Current logger barometric pressure (not supported by all
models of NRL).
Press DOWN key to advance to next screen(s)
A00......A15
Voltages present on analog inputs.
Note that these may show spurious values if they are
unconnected or not supported by the model of NRL in
use.
C0......C7
Current values stored in logger counter registers. Not all
models of NRLs support all eight counter channels.
Unsupported channels will read zero.
Press LOGGER STATUS to advance to next screen
Baro xx.xdegC
Temperature of barometric pressure sensor
Acc xx.xdegC
Temperature of accelerometer sensor
X x.xxxG
Accelerometer X-axis value
Y y.yyyG
Accelerometer Y-axis value
Z z.zzzG
Accelerometer Z-axis value
Orient Logger
orientation
value
