UniData Communication Systems 6527B Скачать руководство пользователя страница 1

Страница: 1 / 34

Manual

Starflow QSD Model 6527B and 6537A

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules in the U.S.A. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at their own expense.

This equipment has been tested for compliance with European regulations as follows:

Application of Council Directive:

2004/108/EC

Standards to which Conformity is declared:

EN-61000-6-1:2001

EN-61000-4-2:1995

EN-61000-4-3:1995

EN-61000-4-4:1995

EN-61000-4-6:1996

ENV-50204:1995

Any changes or modifications to this equipment not expressly approved by the manufacturer Unidata

Pty Ltd could void the user’s authority to operate this equipment.

Revision History

File name / Revision

Date

Authors & Change

Details

Checked/

Approved

Unidata Manual - 6537A Starflow QSD SDI-12 User Manual 27 05 2019.docx

27 05 2019

IM First Draft

Unidata Manual - 6537A Starflow QSD User Manual 21 06 2019

21 06 2019

RDS, PD

Unidata Manual - 6537A Starflow QSD User Manual 04 07 2019.doc

04 07 2019

Unidata Manual - 6537A Starflow QSD User Manual 12 07 2019.doc

12 07 2019

Unidata Manual - 6537A Starflow QSD User Manual 17 07 2019

17 07 2019

KC MS

Unidata Manual - 6537A Starflow QSD User Manual 28 10 2019.doc

28 10 2019

Unidata Manual - 6527B and 6537A Starflow QSD User Manual 27 11 2019.doc

27 11 2019

Unidata Manual - 6527B and 6537A Starflow QSD User Manual 17 01 2020.docx

17 01 20

IM Update EC Specs

Streamline Measurement Ltd

Streamline Measurement Ltd, 01457-864334, [email protected],

www.streamlinemeasurement.co.uk

Содержание 6527B



































Результаты поиска

Содержание 6527B

Отзывы:

Похожие инструкции для 6527B

Бренды по названию

Популярные бренды

UniData Communication Systems 6527B, Руководство пользователя

Результаты поиска

Содержание 6527B

Отзывы:

Похожие инструкции для 6527B

Бренды по названию

Популярные бренды