background image

Safety

KW-Series | Version 1.03

5

2.3 Requirements to staff

Qualifications

The different tasks described in this manual represent 
different requirements to the qualification of the persons 
entrusted with these tasks.

Only persons reliable working procedures can be ex-
pected from, are allowed to perform all works. Persons 
the responsiveness of which is affected by e. g. drugs, 
alcohol or medication, are not allowed to work with the 
machine.

The qualifications of the personnel for the different tasks 
are mentioned below:

Operator

The operator is instructed by the operating company 
about the assigned tasks and possible risks in case of 
improper behaviour. Any tasks which need to be per-for-
med beyond operation in standard mode must be carried 
out by the operator only if it is included in these instructi-
ons and if the operator is familiar with this.

Qualified personnel

Due to their technical training, knowledge and experi-
ence as well as knowledge of the relevant standards and 
regulations, qualified personnel are in a position to carry 
out the work assigned to them and to recognize potential 
dangers independently and to avoid hazards.

Manufacturer

Certain works may only be performed by specialist per-
sonnel of the manufacturer. Other personnel is not au-
thorized to perform these works. Please contact our cus-
tomer service for the execution of all arising work.

2.4 Personal protective equipment

The personal protective equipment serves to protect per-
sons against impairments of safety and health while wor-
king. The staff member has to wear personal protec-tive 
equipment while performing different tasks on and with 
the machine which are indicated in the individual para-
graphs of these instructions.

The personal protective equipment is explained in the 
following paragraph:

WARNING!
Danger in case of insufficient qualification 

of the staff!

Insufficiently qualified persons cannot estimate the 
risks while using the crane scales and expose them-
selves and others to the danger of severe or lethal 
injuries.

-  Have all works only performed by qualified persons.

-  Keep insufficiently qualified persons out of the wor-

king area.

Head protection

The industrial helmet protects the head against fall-
ing objects and hitting on fixed objects.

Ear protection

The hearing protection protects against damages of 
hearing due to noise.

Use safety glasses!

The protective goggles serve to protect the eyes 
against parts flying off.

Protective gloves

The protective gloves serve to protect the hands 
against sharp components as well as against fric-
tion, abrasions or deep injuries. 

Safety boots

Safety boots protect the feet from being crushed, fall-
ing parts and slipping over on slippery ground.  

Protective clothes

Protective clothes are made of a tightly fitted fabric 
without the protruding parts of low tear strength. 

Содержание 6171405

























Отзывы: