ENDAT-GX201 USER’S MANUAL
UNICORN COMPUTER CORP.
47
H/W jumper:
JP8: LCD / CRT selector (1x3 with 2.0mm)
Pin 1-2
LCD
Pin 2-3*
CRT
JP6: LCD Voltage Selector (2x3 with 2.0mm)
Pin 1-2 *
+3.3V
Pin 3-4
+5V
Pin 5-6
+12V
Caution: Improper setting will damage LCD panel.
JP7: LVDS Trigger Edge Selector (1x3 with 2.0mm)
Pin 1-2 *
Rising edge
Pin 2-3
Falling edge
BIOS setting
:
˙
Flat Panel Type
This field is used to select the type of display to use when the system boot.
<Choice: CRT/LCD>
˙
Resolution
This field is used to select the resolution of LCD panel.
<Choice: 640x480/800x600/1024x768/1152x864/1280x1024/1600x1200>
˙Bus Width
This field is used to select the bus width of LCD panel. Generally is “24bits”.
<Choice: 8/9/12/16/18/24>
˙
Data type
This field is used to select the data type of LCD panel. Generally is “Normal”.
<Choice: Normal/2 X>
˙
Refresh Rate
This field is used to select the refresh rate (VSYNC frequency) to LCD panel.
Default is “60 Hz”.
<Choice: 60/65/70/72/75/85>
ENDAT-GX201 USER’S MANUAL
UNICORN COMPUTER CORP.
48
˙
HSYNC Polarity
This field is used to select the polarity of HSYNC for LCD. Default is “Low”.
<Choice: Low/High>
˙
VSYNC Polarity Active
This field is used to select the polarity of VSYNC for LCD. Default is “Low”.
<Choice: Low/High>
˙
SHFCLK Active Period
This field is used to select the working period of shift clock. Generally is “Free
running”.
<Choice: Free running/Active only>
˙
LP Active Period
This field is used to select the working period of line pulse. Generally is “Normal”.
<Choice: Free running/Active only>
Please note that the default setting is with “CRT only”. If the LCD display feature is
required, the setting will need to be revised in the system BIOS setting: “Select Display
Device” under “Advanced Chipset Features”; unless it is specified at the time of order.
