Step.7
Install
& replace batteries
.
Install and replace the batteries
(3 pcs AA batteries required and
NOT Included
)
Note:
Recommended use Alkaline battery for brighter lighting and longer battery life.
WARNING:
Do not mix old and new batteries and do not mix alkaline,
standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.
• Remove the battery box from battery cover with remove the screw
and then push backward to open the battery box.
• Place 3 pcs AA battery in the battery box.
• Attach back the battery cover and screw back the screw.
• Make sure the power switch on the battery box is in “OFF” position
when not in use.
Make sure batteries
are ins/-
polarity correctly
Optional - Use of Battery Box
+
+
-
- +
-
Connect the
P6
USB male port to the
P8
Battery Box. Turn on the switch on the battery box and then touch the power
switch to turn on the LED.
Please see
Figure 7
.
P8
Figure 7
P6
P8
1. Turn to “ON” position
2. Touch once here to turn on / off the LED
Touch and hold to adjust the brightness level
Point of connection
PARTS REQUIRED
1 pc
P8
Battery Box
-
And to be sure to turn OFF
when not in use
- 7 -
Operation of the ORB’s LED Lights - Instructions:
NOTE:
The AC Adaptor or battery pack will need to be plugged in as a power source for the LED Lights.
1.
2.
3.
NOTE:
This LED ORB Unit has a memory function that will keep the last brightness level setting that you adjusted. This will
allow the device to be the same the next time it is turned on. Adjust accordingly to your liking.
Touch and lightly press the ON/OFF Switch once to power ON the LED’s.
Touch and hold the ON/OFF Switch to adjust the brightness level of the LED’s.
Touch and lightly press the ON/OFF Switch to power OFF the LED’s.
