- 5 -
Step.3
Insert 6 pcs of the
P4
Connecting Clips, into the aligned holes from
Step 2
as per
Figure 3
, in order to secure
all parts.
Step.4
Note:
This assembly step will require a cylindrical object from your home, such as a large bowl or cooking pan
with a
diameter of 12”
to
18”
and at least
5” tall
.
Next, place a cloth on top of the cylindrical object to protect both it and the dartboard.
Note:
The purchased separately 18” Bristle Sisal Dartboard should be assembled per its instructions prior to this
Step 4.
Next, place the dartboard, right side down (face down) and balanced, onto the cylindrical object.
Next, top of the dartboard will be the
#20
, Bottom of the ORB will be the USB cord and plug (when installed on
the Dartboard), and when all are mounted on the wall.
Next, carefully slip the ORB 360 assembly down and onto the dartboard allowing the ORB magnets to come into
contact with the outer dart board metal ring. Carefully seat the ORB assembly completely onto the dartboard.
Please see
Figure 4
.
USB plug
Figure 3
FRONT
USB plug
Figure 4
FRONT
P1
P2
P3
P4
P4
P4
P4
P4
P4
Cylindrical bowl or pan with a diameter of 12” to 18”
and at least 5” tall
NOTE:
All magnets need to touch and
stick to the outer dartboard metal ring
IMPORTANT NOTE!
Please make sure the
number “
20
” is on the top side
when dartboard is
mounted to the wall
TOP
PARTS REQUIRED
6 pcs
P4
Connecting Clips
-
NOTE:
Holes must align in order
to install the
P4
Connecting Clips
Backside of
dartboard
Bottom or floor side when
mounted to the wall
Connecting Clip
