unicore UM981 Скачать руководство пользователя страница 2

 

Revision History 

Version  Revision History 

Date 

R1.0 

First release 

Sept. 2023 

Legal right notice   

This manual provides information and details on the products of Unicore 

Communication, Inc. (“Unicore”) referred to herein.   

All rights, title and interest to this document and the information such as data, designs, 

layouts contained in this manual are fully reserved, including but not limited to the 

copyrights, patents, trademarks and other proprietary rights as relevant governing laws 

may grant, and such rights may evolve and be approved, registered or granted from the 

whole information aforesaid or any part(s) of it or any combination of those parts. 

Unicore holds the trademarks of “

和芯星通

”, “UNICORECOMM” and other trade name, 

trademark, icon, logo, brand name and/or service mark of Unicore products or their 

product serial referred to in this manual (collectively “Unicore Trademarks”). 

This manual or any part of it, shall not be deemed as, either expressly, implied, by 

estoppel or any other form, the granting or transferring of Unicore rights and/or 

interests (including but not limited to the aforementioned trademark rights), in whole or 

in part. 

Disclaimer 

The information contained in this manual is provided “as is” and is believed to be true 

and correct at the time of its publication or revision. This manual does not represent, 

and in any case, shall not be construed as a commitments or warranty on the part of 

Unicore with respect to the fitness for a particular purpose/use, the accuracy, reliability 

and correctness of the information contained herein. 

Information, such as product specifications, descriptions, features and user guide in this 

manual, are subject to change by Unicore at any time without prior notice, which may 

not be completely consistent with such information of the specific product you 

purchase. 

Содержание UM981




























Отзывы: