unicore UM960eb Скачать руководство пользователя страница 3

 

 

ii 

Legal right notice   

This manual provides information and details on the products of Unicore Communication, Inc. 

(“Unicore”) referred to herein.   

All rights, title and interest to this document and the information such as data, designs, layouts 

contained in this manual are fully reserved, including but not limited to the copyrights, patents, 

trademarks and other proprietary rights as relevant governing laws may grant, and such rights 

may evolve and be approved, registered or granted from the whole information aforesaid or any 

part(s) of it or any combination of those parts. 

Unicore holds the trademarks of “

和芯星通

”, “UNICORECOMM” and other trade name, trademark, 

icon, logo, brand name and/or service mark of Unicore products or their product serial referred to 

in this manual (collectively “Unicore Trademarks”). 

This manual or any part of it, shall not be deemed as, either expressly, implied, by estoppel or any 

other form, the granting or transferring of Unicore rights and/or interests (including but not limited 

to the aforementioned trademark rights), in whole or in part. 

Disclaimer 

The information contained in this manual is provided “as is” and is believed to be true and correct 

at the time of its publication or revision. This manual does not represent, and in any case, shall 

not be construed as a commitments or warranty on the part of Unicore with respect to the fitness 

for a particular purpose/use, the accuracy, reliability and correctness of the information contained 

herein. 

Information, such as product specifications, descriptions, features and user guide in this manual, 

are subject to change by Unicore at any time without prior notice, which may not be completely 

consistent with such information of the specific product you purchase. 

Should you purchase our product and encounter any inconsistency, please contact us or our local 

authorized distributor for the most up-to-date version of this manual along with any addenda or 

corrigenda. 

 

Содержание UM960eb






























Отзывы: