5686G-PRO User Guide
Page
12
of
94
Copyright © 2018 USR, a Division of UNICOM Global
To do this
Set DIP Switch To this setting
Enable the echo in offline commands
4
OFF (Default)
Disable the echo in offline commands
4
ON
Enable auto answer
5
OFF
Disable auto answer
5
ON (Default)
Normal Carrier Detect
6
OFF (Default)
Carrier Detect always on
6
ON
Load Y0-Y4 configuration that is stored in non-volatile memory
(NVRAM)
7
OFF (Default)
Load the &F0 configuration from read-only memory (ROM)
7
ON
Disable AT commands
8
OFF
Enable AT commands
8
ON (Default)
Accessing and Configuring the Modem Remotely
This section contains information about:
Quitting a Remote Access Session
Overview
You can set up the Courier Lite 56K Business Modem so other devices can view or change its
configuration remotely.
You should be familiar with these terms before you continue:
Local
The device that is directly connected to the computer you are using.
Remote
The device at the other end of a telephone connection.
Host
The Courier Lite 56K Business Modem that will be accessed and controlled by other
devices.
Guest
The device that will access and control the host Courier Lite 56K Business Modem.
