5686G-PRO User Guide
Page
13
of
94
Copyright © 2018 USR, a Division of UNICOM Global
Setting Up Remote Access
At the Host Courier Lite 56K Business Modem
1.
Prepare to send AT commands by putting your communications software in Terminal Mode.
2.
Enable remote access.
Set Register S41 for a value of 1 or greater. S41 sets the number of login attempts available to
the remote user. A setting of zero allows no login attempts disabling remote access.
Example:
Sending
ATS41=1&W
allows for 1 login attempt by a remote user.
3.
Set one or two remote-access passwords.
You can set two passwords to allow different levels of access to each Courier Lite 56K
Business Modem.
To allow guest users to
Use this command to assign
a remote-access password
View the Courier Lite 56K Business Modem’s configuration.
AT%P0=
password
View and change the Courier Lite 56K Business Modem’s configuration. AT%P1=
password
Example:
Sending
AT%P1= wombat
will allow a remote user to log in with the password "wombat."
The user can view and change the Courier Lite 56K Business Modem’s configuration.
Note:
Remote-access passwords can be up to eight alphanumeric characters long, and are not case -
sensitive.
