6
01865 767676
www.unicol.com
Revised 22/04/21
STEP 13
Identify remaining mast in-fill panels. Start from
the bottom and clip 2 of the 3 larger rear panels in,
threading cabling through where necessary.
STEP 1
Turn the base upside down and push each
non-marking rubber foot until it clicks into place.
STEP 2
Place the 2 columns with holes, located approx
75mm from the bottom, over the crocodile lugs on
the base.
Continue with Step 3 on page 3.
STAND OPTION
