4
01865 767676
www.unicol.com
Revised 22/04/21
STEP 5
Once placed over columns and at the desired
height, tighten the two grub screws to secure into
place. Tighten up the base grub screws to secure.
Optional: Use the column bungs to finish off the
columns by gently pushing them into the top.
STEP 6
Line the back plate up with the span unit,
as shown above. Fix 4x M10x20 screws from
behind the mount adapter and into the 4 rivet
nuts located on the back plate. Ensure back plate
is secure and screws are tightened. This can be
adjusted later. Repeat for the other side.
STEP 7
Utilising the tag locks and fixing pack provided with
your mount, attach the arms to the back of your
screen.
Ensure the arms are the correct way up before
tightening - the ‘hook’ part of the arm should be at
the top.
STEP 8
Using another team member, lift the screen up and
gradually offer it up to the back plate. Gently tilting
the screen forward, hook the arms over the lip of
the back plate and lower once in position.
Centre the screen horizontally by sliding from side
to side until you are happy with the position.
