background image

16

Pre-Installation

Before you install the KVM Matrix over IP Extender System, you should have these items on the checklist 

ready:

• Plan the layout path and deploy the UTP cable for extension.
• Plan the path through which the CAT5E UTP cable (or higher category network cable) will be deployed 

across the distance between the Transmitters and the Receivers. You should choose the layout path not 

only based on shortest possible length consideration, but also on least electromagnetic interference.

• It’s strongly recommended to shorten your Cat5x cable than 100m if the network architecture contains 

the equipment such as RJ45 extender adapter, otherwise, the signal may be declined. 

Notes:

1. Use good quality CAT5E cable can be produced the better video outcome with longer distance span.
2. To choose the path of the CAT5E UTP cable should not only take into account the shortest possible 

path, but also consider keeping out from any significant electromagnetic interference source.

3. The ideal location for the power outlets near where you located the extenders.

Requirement of Gigabit Ethernet Switch

• When grouping these units of Transmitter and Receiver, a Gigabit Ethernet Hub/Switch is necessary 

due to the requirement of bandwidth. To ensure the better quality of transmission, a reputable name 

brand hub/switch is recommended. 

• Some features of Gigabit Ethernet Switch/HUB are required, for example, 

IGMP Snooping

Multicast 

Filtering

 and 

Jumbo Frame

, other specs like 

IGMP Querier

IGMP v2

 and 

IGMP Fast Leave

 are strongly 

recommended. If more than one transmitter connects to the same network segment without support 

of IGMP Querier by Switch/Hub, the Extender System may work incorrectly. The images below are 

examples of the settings, for more setting details, please refer to the Hub/Switch's instruction manual. 

IGMP Snooping 

Jumbo Frame

Multicast Filtering

• Make sure you have enough available bandwidth between switches if the Network you connected is a 

cascading architecture, otherwise, the quality of stream video may poor. 

Содержание DX120

























Отзывы: