4
T
08 9351 7500
E
W
www.unicarehealth.com.au
Assembling and Adjusting the Footrest
•
Place a washer
K
onto the footrest threaded hand wheel
H
and put the hand wheel screw through
the open hole on the front of the footrest.
•
Wind a T-nut
J
onto the screw (ensure that it is in the correct orientation).
•
Guide the T-nut into the footrest tube.
•
Align the lozenge on the rear of the footrest at the desired height with a slotted feature on the
footrest tube. Tighten the hand wheel to lock the footrest in position.
•
Pass four-foot straps I through the holes provided on the footrest and retain with the buckle clamps.
•
To adjust the footrest, support the footrest, loosen the hand wheel and adjust for height.
SAFETY NOTE
The footrest should never be used as an aid for
mounting or dismounting the chair.
The footrest should never be positioned so that the
footrest hangs below the footrest tube.
Always ensure the lozenge on the rear of the footrest
is located into a slot on the footrest tube.
Fitting the Potty
•
Alight the potty
D
in the grooves on the seat
underside and slide the potty into place. The
locking mechanism should automatically lock
in position.
•
To remove the potty, hold the potty handle, lift
the latch and slide the potty out from the seat.
