6
2 WORKING MODE
The conditioner is designed to create the ideal cli-
matic conditions for the wellbeing of the people in
the room.
It is able to cool and dehumidify (and heat in the
models with heat pump) the air in a completely
automatic way.
The air sucked by the fan enters from the grill of
the front panel and passes through the filter, which
keeps the dust. Then it is conveyed between the
flaps of a "heat exchanger" and cooled and dehumi-
dified or heated through a flapped coil.
The heat removed from the room is drained outside.
When the cycle is finished the fan gives back the
fresh air in the room; the outlet direction of the air is
regulated by the flaps, which are motorized up and
down, and by the vertical deflectors (right and left),
manually moved.
Filter
Heat exchanger
Fan
The device can automatically select the ideal temperature as to the user's desire.
Press pushbutton
MODE
to access this mode
In the
“AUTO”
working the electronic control auto-
matically selects the working mode as to the room
temperature (taken by the probe which is incorpora-
ted in the indoor unit):
·
if the room temperature falls under 20° C, a hea-
ting cycle is activated. It remains in function till the
temperature doesn’t rise above 22° C;
·
if the room temperature exceeds 25° C a cooling
cycle is activated. It remains in function till the tempe-
rature doesn’t fall under 23° C.
The
“AUTO”
mode can be activated also selecting
the pushbutton placed inside the front panel of the
indoor unit.
“AUTO” SYSTEM OF AUTOMATIC ADJUSTMENT
2.1
To optimize the working of the conditioner, adjust
the temperature (1), the speed (2) (see chapter 2,6)
and the direction of the air flow (3) by pressing the
pushbuttons indicated in the figure.
ON/OFF
MODE
COOL
HEAT
FAN
SWING
+
BLOW
TIMER
°
C
%
AIR HEALTH BLOW
HUMIDITY
FILTER
TURBO
LIGHT
FA N
AUTO
HOUR
ON/OFF
OPER
LIGHT
SLEEP
TURBO
1
3
2
